|
|
Sensorex - CS700 Contacting Conductivity Sensor
Model #: 999-543-018
*Prices are subject to change without notice
The Sensorex CS700 Conductivity Sensor is ideally suited for ultrapure/pure water, drinking water, and lower-conductivity drinking water applications. It’s durable in high-temperature (150° C / 302° F) and high-pressure environments (1,379 kpa / 200 psig), thanks to stainless steel and PEEK construction. In addition, quick installation is made possible via using compression fitting with 3/4” or 1/2” threads. Pick from three cell constants based on your application: 0.01, 0.1 (available soon) and 1.0 (available soon).
Standard delivery is 1-2 weeks but typically will ship sooner.
Product Description
The Sensorex CS700 Conductivity Sensor is ideally suited for ultrapure/pure water, drinking water, and lower-conductivity drinking water applications. It’s durable in high-temperature (150° C / 302° F) and high-pressure environments (1,379 kpa / 200 psig), thanks to stainless steel and PEEK construction. In addition, quick installation is made possible via using compression fitting with 3/4” or 1/2” threads. Pick from three cell constants based on your application: 0.01, 0.1 (available soon) and 1.0 (available soon).
Benefits:
High Accuracy and Repeatability
- Accuracy is 2% of reading with 0.1% repeatability*
- Electro-polish finish provides excellent stability and consistency
Multiple Cell Constants Cover Wide Range of Applications
- 0.01/cm for ultra-pure/pure water
- 0.1/cm for pure and drinking water
- 1.0/cm for wastewater and process water
Durable in High-Temperature and High-Pressure Environments
- Built from 316 Stainless Steel and Teflon
- Withstands up to 150° C (302° F) and 1379 KPA (200 PSIG)
*Accuracy and repeatability of the sensor depends on the accuracy of the calibrating electronics
Product Features
- Cell Constants: 0.01/cm
-
Response Time: < 30 seconds
-
Temperature Rating: 150° C (302° F) with high temperature cable, 70° C with standard cable
-
Pressure Rating: 1379 kPa (200 psig)
-
Materials of Construction: 316 Stainless Steel Body with Teflon wetted materials
-
Process Connection: 3/4” NPT or 1/2” NPT
-
Communication: Raw output (standard) or Remote Electronics (Modbus)
-
Temperature Compensation: Pt1000 RTD
|
|
|
|
