|
|
Renner Pump - RTM 4 Series Pump
Model #: 999-396-081
*Prices are subject to change without notice
RENNER vertical centrifugal immersion pumps are designed for vertical deployment in non-pressurized tanks, open basins or pits.
Standard delivery is 1-2 weeks but typically will ship sooner.
Product Description
RENNER vertical centrifugal immersion pumps are designed for vertical deployment in non-pressurized tanks, open basins or pits. They offer the same range of services as magnetic drive centrifugal pumps, and enable additional possibilities due to the vertically submerged installation in the container or tank. - Without sealings
- Safe-to-run-dry
- Space-saving by direct installation
- Saving of suction pipes
- Customer-specific installation flange
- Construction in fully plastic material
- Variable discharge connection
- Direct mounting of the RENNER filter housings
- All RENNER vertical pumps RT are available with an integrated variable speed drive
- All pumps with high efficiency motors (IE2 + IE3 + IE4)
- Corrosion-free plastic pumps
- Alternatively also pumps made of stainless steel or titanium
- Energy efficient thanks to high overall efficacy of the system (pump / motor)
Product Features
Materials:
- PP gray or natural (available with or without fiber glass)
- PVDF natural (no fiber glass)
- PPS (Ryton®)
- PFA, ECTFE
- PVC, CPVC
- Stainless steel
- Titanium
Seals:
- EPDM
- FKM
- FFKM
- Kalrez
- FEP-encased
Hydraulic efficiency:
- Hmax = up to 45 mWS
- Qmax = up to 180 m3/h [3,000 l/min]
Drives:
- 60 W to 22.0 kW
- All voltages / frequencies
- Asynchronous single or three phase
- Synchronous PM
- DC motors 12 V to 48 V
- Protection classes: IP55, IP56, IP66, IP67, IP68
- All motors from 0.37 kW with additional phase insulation suitable for frequency converter operation (for 60 W to 250 W available on request)
- Tropical insulation
- Anti-condensation heater
- VIK version
- UL, CSA-c/US version
- Motor cooling IC 411 (integrated fan)
- IC 410 (surface cooling)
Connectors:
- Witworth pipe thread (sealing surface with O ring groove or for gasket)
- Flange DIN2501, ANSI-Class 150
- NPT adapter
Conveying Media:
- Density: up to max. 2.0 kg/dm3
- Viscosity: up to maximum approximately 160 mPas (cP)
- Acids, alkalizes, mixtures
- Solvents
- Alkaline degreasing baths
- Electroplating baths
- Photo chemicals
- Radioactive, sterile, precious media
- Foodstuffs
- Other low-viscosity media
Temperature limits:
- PP: 0 to +80 °C
- PVDF: -20 to +100 °C
- PFA/ECTFE: -20 to +100 °C
- PPS (Ryton®): -20 to +100 °C
- Stainless steel: -20 to +100 °C
- Titanium: -20 to +100 °C
Product Applications
- Electroplating industry
- Etching and cleaning systems
- Refrigeration machines
- Solar systems
- Treatment of wastewater and fresh water
- Photographic industry
- Textiles and foodstuff industry
|
|
|
|
