|
|
Flux Pumps - F/FP 430 Drum Pump
Model #: 999-308-008
*Prices are subject to change without notice
The pump F/FP 430 can be universally used for various media and is appropriate for emptying drums, IBCs or tanks.
Standard delivery is 1-2 weeks but typically will ship sooner.
Product Description
The pump F/FP 430 can be universally used for various media and is appropriate for emptying drums, IBCs or tanks. The mechanical seal prevents medium getting into the inner tube. For a fast cleaning the pump can be easily disassembled into two parts. Immersion lengths up to 3000 mm are possible. The steel core in the inner tube (PP and PVDF) provides highest stability. The pump is driven by a commutator motor, a compressed-air motor or a brushless motor. The pump is available as FOOD or FDA version or for the use in hazardous areas. The outer tube is available in stainless steel, polypropylene, polyvinylidene fluoride, aluminum and Hastelloy C. - With mechanical seal for sealing the inner tube
- Pump can be disassembled into two parts: inner tube cpl. and outer tube
- Inner tube with steel core on PP and PVDF
- Versions for the use in hazardous areas available
- FOOD version available
- Grease-lubricated shaft bearing
Product Features
Specifications:
- low rate: max. 240 l/min1
- Delivery head: max. 30 mwc1
- Viscosity: min. 1 mPas - max. 1200 mPas1
- Outer tube diameter: min. 40 mm - max. 50 mm2
- Immersion length: 700, 1000, 1200
- Materials outer tube: Polypropylene, Polyvinylidene fluoride, Stainless steel, Aluminium, Hastelloy C
- Media / Fluids: Acids, Alkalis, Petroleum products, Highly flammable media, Solvents, Fuels, Aqueous salt solutions
- Seal: with mechanical seal
- Container: 200 l drums, 1000 l IBC, Tanks > 1000 liters
Benefits:
- Medium does not get into the inner tube, thus no carrying-over of media
- The same pump can be used for various media
- Fast and easy disassembly
- Ideal if a frequent cleaning of the pump is required (e.g. in case of frequent medium changes, hardening media, fast drying media, crystallizing media)
- For plastic versions the function of the mechanical seal fully remains over the temperature application areas
- High stability of the pumps in plastic version enables immersion lengths of up to 3000 mm even here
- Version in stainless steel and Hastelloy C can be used in hazardous areas
- FOOD version conform EC 1935/2004 for contact with food available
|
|
|
|
