|
|
Flux Pumps - F/FP 424 Drum Pump
Model #: 999-308-011
*Prices are subject to change without notice
The F/FP 424 is ideal for transferring various low-viscosity, also aggressive media and is suitable for emptying drums and IBCs.
Standard delivery is 1-2 weeks but typically will ship sooner.
Product Description
The F/FP 424 is ideal for transferring various low-viscosity, also aggressive media and is suitable for emptying drums and IBCs. It requires little maintenance - there is no seal or bearing wear. Due to the special design the medium cannot be contaminated by lubricants. It is driven by a commutator motor, a compressed-air motor or a brushless motor. The pump is available in stainless steel, polypropylene or polyvinylidene fluoride. - No seal in the medium area
- No lubricants in the inner tube
- Long spiral-shaped guide bearing
- Relief openings provide the same fluid level inside the pump compared to the drum content
- Operates on the centrifugal pump principle
- Vapour barrier in front of coupling-sided bearing
- Versions for the operation in hazardous area of zone 0 (equipment category 1) available
- Version free of non-ferrous metal for transferring AdBlue® available
Product Features
Specifications:
- Flow rate: max. 240 l/min1
- Delivery head: max. 30 mwc1
- Viscosity: min. 1 mPas - max. 1200 mPas1
- Outer tube diameter: min. 40 mm2 - max. 50 mm2
- Immersion length: 700, 1000, 1200
- Materials outer tube: Polypropylene, Polyvinylidene fluoride, Stainless steel
- Media / Fluids: Acids, Alkalis, Petroleum products, Highly flammable media, Solvents, Fuels, Aqueous salt solutions, Aggressive media
- Seal: sealless
- Container: Small containers, Hobbocks, 200 l drums, 1000 l IBC
Benefits:
- No seal wear
- No contamination of the medium from lubricants or wear of seal materials possible
- Non-sensitive to dry-running
- Particularly suitable for hydrochlorid acid and chromic acid
- Built to last
- Low vibration
- Optimal emptying of the inner tube
- No bearing wear
- Can be operated against closed valve (hand nozzle, valves etc.) until the indicated temperature of the materials is reached
- Longer life circle of the coupling-sided bearing
- Low wear and maintenance
- Stainless steel version for use in hazardous area
- Versions for use with AdBlue® also available
|
|
|
|
