CART (0)
$0.00
The Sandpiper Air-Powered Single Diaphragm High Pressure Metallic Pumps deliver discharge pressure twice the inlet pressure, up to 250 PSI (17.2 BAR). Designed for filter press feed and applications requiring higher discharge pressures. Available in Aluminum, Cast Iron and Stainless Steel with various elastomer options.
The Sandpiper HD20F Metallic pump is available with either reinforced threaded or flanged connection. The robust, yet lightweight design allows for ease of maintenance and movement, and is ideal for handling solids and corrosive fluids.
When durability and reliability are paramount in the rigorous environments of today’s mines and construction sites, our mining and construction Sandpiper pumps are a great solution.
When durability and reliability are paramount in the rigorous environments of today’s mines and construction sites, our mining and construction pumps are a great solution. With more ways than one, these pumps are designed to be tossed, dragged and crammed into position to get the fluids you need removed in a hurry.
The Sandpiper Natural Gas Operated Pumps are CSA* (Canadian Standards Association) certified to ANSI LC6 standard for operation using sweet or sour natural gas. The pumps are also compliant with NACE Standard MR0175/ISO15156.
Designed to meet USDA (United States Department of Agriculture - Dairy Division) standards, these Sandpiper pumps are the ultimate in leak protection and clean pumping with the paired performance of AODD technology.
The Sandpiper FDA (Food & Drug Administration) Material Compliant Pumps are ideally suited for a variety of food processing, pharmaceutical and cosmetic industry applications.
The Sandpiper SludgeMaster™ Submersible, Air-Powered Trash Pump handles mud, leaves, twigs, sand, sludge, trash-laden water and soft solids to 1½" (3.8cm). High capacity, low head. The pump weighs only 59 pounds (26kg), and can fit through an opening as small as 14" (35cm). Sturdy construction for rough handling and long life. Optional rock screen available.
The Sandpiper UL (Underwriters Laboratory) Compliant Pumps are designed to meet UL79 standards for diaphragm pumps handling flammable liquids. All Aluminum construction with approved Nitrile or Virgin PTFE UL elastomers. Fully groundable to prevent static discharge.
The Sandpiper Non-Clog Wastewater Pumps are fitted with swing check valves and easy access clean-outs. The pumps are designed specifically for slurry and solids-laden materials.
The Sandpiper Standard Duty Metallic Pumps are ideally suited for intermittent / on-demand, portable, moderately abrasive fluids, and suspended solids.
The Sandpiper Standard Duty Metallic Pumps are ideally suited for intermittent / on-demand, portable, moderately abrasive fluids, and suspended solids. PLEASE NOTE:Effective Date: 03/09/2020Change Overview:All SANDPIPER S15 (1 ½”) Non-Metallic pumps equipped with either ANSI or DIN flanges will be transitioning to a “Universal ANSI/DIN Flange” that will work on both flange types.
The Sandpiper StandardDuty Metallic Pumps are ideally suited for intermittent / on-demand, portable, moderately abrasive fluids, and suspended solids.
The NEW Sandpiper S30 Non-Metallic Standard Duty Ball Valve Pump is the best choice for bulk chemical transfer applications.
The Sandpiper PortaPump® Submersible, Battery-Powered Pump operates using any 12-volt car or truck battery. It comes equipped with cables and battery clips. Extremely portable, the pump weighs only 33 pounds (15kg) and can fit through openings as small as 10" (25cm). Electrically safe and whisper quiet.
The Sandpiper Containment Duty Metallic and Non-Metallic Pumps are ideal for highly corrosive and hazardous chemical fluid requirements. All containment duty pumps are exclusively designed with containment chambers, hydraulically balanced/coupled pumping diaphragm and driver diaphragm assemblies.
Serfilco's 303SS Drive Shaft part for ‘EHLX’ Vertical Pumps (18”) replacement part for EH and EHH vertical pumps. * This part is not compatible for the standard length ‘EH’ Vertical Pumps
Serfilco 3/8” Ser-Ductor Nozzle, CPVC part for use with a SER-DUCTOR system provides solution agitation with a centrifugal pump by drawing liquid from a tank and returning it to the tank through a sparger system, similar to that used for air agitation, with eductors strategically placed along the sparger pipe.
Serfilco 3/8” Ser-Ductor Nozzle, Polypropylene part for use with a SER-DUCTOR system provides solution agitation with a centrifugal pump by drawing liquid from a tank and returning it to the tank through a sparger system, similar to that used for air agitation, with eductors strategically placed along the sparger pipe.
Serfilco’s 'EF' Vertical Pump Series represents the next generation of molded pumps from Serfilco with flows to 400 gpm at 60 Hz. It is a robust design to meet the most demanding applications while providing the economy of operation found in all of our molded pumps.The 'EF' features a cantilevered, sleeved, SS shaft with vapor seal to provide protection for the motor. The cantilevered shaft eliminates bearings and conventional pump seals, resulting in a pump that can run dry indefinitely without damage. This pump is offered in a choice of our exclusive PPP high temperature polypropylene or CPVC construction and, as with all of our vertical cantilever pumps, provides non-metallic solution contact.
