Fusion Fluid Equipment has created a clean and simple design; that is autoclave- capable, sanitary mixer that is designed to meet your FDA, 3A, USP-VI, or BPE requirements.

The Fusion Fluid Equipment Marine-Style Impeller is the most common type of mixing impeller. Because the design has its roots in the marine propulsion industry, it is the most effective axial pumper at higher mixing speeds.

Fusion Fluid Equipment has heavy duty, all stainless steel sanitary mixers that are designed to meet your sanitary requirements.

The Fusion Fluid Equipment Cowles, or Sawblade, design of this impeller provides mixing by generating high shear levels. This design is most commonly used in applications where the high shear levels are needed to prevent clumping.

Fusion Fluid Equipment drum mixers are designed for quick setup and enhanced portability while providing uniform mixing.  Standard and custom designs are available to meet your needs.

Fusion Fluid Equipment Flow Series Mixer – Parallel Shaft  are heavy-duty and extremely flexible. 

Fusion Fluid Equipment Flow Series Mixer – Right Angle Drive are heavy-duty and flexible.   The Flow Series Right Angle mixers are designed to meet the needs of your large scale mixing applications.

Fusion Fluid Equipment can design and produce anchor/helix impeller styles in a range of sizes with various materials, including 304 Stainless Steel, 316 Stainless Steel, Hastelloy, Aluminum, or Carbon Steel.

The Fusion Fluid Equipment Pitch Blade Turbine Impeller is the workhorse of the mixing industry. The simple design of the PBT impeller provides a combination of both radial and axial flow, generates high shear levels, and provides excellent mixing ability while providing easy cleanup.

The Fusion Fluid Equipment modern design of the PF3 Hydrofoil Impeller provides excellent pumping ability with a strong axial flow.

Fusion Fluid Equipment has the Pro Series line of Mixers.  These mixers are lightweight, but rugged.  It features a one-piece investment-cast aluminum bearing housing with two oversized bearings for high performance a long service life.

The Fusion Fluid Equipment unique design of this retreat impeller provides a simple radial flow pattern that moves material from the center of the vessel outward where it flows along the outer walls of the tank.

The Fusion Fluid Equipment Rushton impeller, named after its designer, is one of the first mixing impeller designs to be documented. The classic design of this impeller provides a simple radial flow pattern that moves material from the center of the vessel outward where it flows along the outer walls of the tank.

Fusion Fluid Equipment array of specialized lab mixers are produced for your specific process while your application is approached with the quality and flexibility that it demands.

The Fusion Fluid Equipment folding impeller is most commonly used in applications where access to the vessel is limited, such as drum mixers and tote mixers.

The 3656 and 3756 M & L-Group pumps from Goulds Water Technology have been designed with technical benefits to meet the needs of users in a variety of water supply, recirculation, and cooling applications.

The 3656 and 3756 S-Group pumps from Goulds Water Technology have been designed with technical benefits to meet the needs of users in a variety of water supply, recirculation, and cooling applications.

The Goulds NPE/NPE-F pumps are designed for a broad range of general applications traditionally requiring various materials such as all iron, bronze fitted, all bronze or stainless construction.

The Goulds SSH pumps are designed for a broad range of general applications traditionally requiring various materials such as all iron, bronze fitted, all bronze or stainless construction

The Grundfos CHI Multi-Stage Horizontal pump is ideal for a wide variety of commercial and industrial applications. Its small size saves valuable space.

The Grundfos CR multi stage centrifugal pump offers high efficiency and lower electricity consumption. These results are attributed to the unique hydraulic design and new production techniques.

The Grundfos HS end-suction pump combines compact design, economical cost and simple maintenance to provide high-efficiency performance in a wide variety of applications.

The Grundfos Unilift AP and Unilift AP Basic are submersible drainage pumps designed for both temporary/portable installation and permanent free-standing installation.

The Gusher 7071 Series is a horizontal, open impeller centrifugal pump that meets the specifications of ANSI B-73.1. The series consists of 3 Power Frames and 33 pump sizes.

The Gusher 7550 Series has been designed to give heavy duty pumping service in a wide range of industrial applications including spray booths, industrial spray washers, paint, and coolant systems. 

The Gusher 7600 series has been designed to minimize maintenance. 

The Gusher 8000 Series are horizontal pumps designed for a wide range of uses from agricultural to industrial.

The Gusher CL-CC general service pumping or industrial services, is a perfect reliable and economical solution. The close-coupled design and ANSI dimensional casing make installation extremely simple.  The CL-CC Series is also easy to operate and maintain with the added benefit of substantially reduced maintenance costs.

The Gusher Molten Metal pumps handle lead, babbit, solder, tin, zinc, spelter, at temperatures up to 1200°F.

The Gusher SC-CC Series general service or industrial pump is a perfect, reliable and economical solution.

The Gusher Vortex Non-Clog is designed to handle large solids and fibrous materials without clogging.

Hayward builds its Webster Series C Horizontal End Suction Centrifugal pumps to stand up to the toughest industrial and commercial applications.

The Hayward/Webster D1 Series vertical seal-less immersible pump is a smaller capacity pump with built-in reliability.

With the latest, patented pump technology, Hayward’s Webster Series R all-plastic, corrosion resistant pumps will stand up to the most aggressive, demanding industrial applications year in and year out.

The Hayward/Webster S2 Series vertical pump is built in reliability. The all-plastic pump construction is a great fit for chemical applications.

The Hayward/Webster S4 Series vertical pump, when reliability is not just a requirement, but a necessity.

The Hayward/Webster SS7/SS8 Quick Service vertical immersible pumps are a rugged, non-metallic chemical duty pump.

The resolution of the CFD-1T-B has been greatly improved compared to our existing models.

Two models for circulating medium temperature liquid.  The right pump for the right job. The FA Series bellows pump addresses low flow and high flow requirements at low to medium temperatures (5 to 100°C). The FA-2E pump is for precise chemical delivery for flow rates up to 0.5 gpm (2 L/min).

The FF series are specified for use with medium temperature liquids (The PVC cylinder type: 5 to 50˚C; Al cylinder type: 5 to 100˚C.) and the FF-H series are designed to handle a wide range of chemical liquids ranging from ordinary temperatures to high temperatures (20 to 180˚C).

The FLP-60W features a built-in low pulsation design that eliminates the need for a pulsation dampener and reduces air consumption.

Compact, all-temperature rated, low-cost, air-driven bellows pump.

Robust bellows design, high-pressure performance and long service life.

Iwaki America, the world leader in small magnetically coupled centrifugal pump technology, offers the premier line of non-metallic centrifugal pumps. 

Iwaki MD Series-70RLT Pump - Iwaki America, the world leader in small magnetically coupled centrifugal pump technology, offers the premier line of non-metallic centrifugal pumps.