CSA approved intrinsically safe for use in general purpose or hazardous applications, the two-wire ultrasonic transmitter provides non-contact level measurement up to 18' or 5.4m, and is ideally suited for challenging corrosive, slurry or waste liquids.

Offered in both vertical and horizontal float configurations, the general purpose high-temp float level switches are an ideal choice for relatively clean water, diluted chemical or petroleum based liquids with non-coating and/or scaling characteristics.

The general purpose controller has a graphic display with four 4-20 mA transmitter input channels and 6 programmable relays.

The Flowline SwitchPoint compact junction box is offered in small and large sizes.

The Flowline DataLoop II safe loop powered meter is intrinsically safe and has general-purpose configurations.

The general purpose meter displays engineering units with one 4-20 mA or 0-10 VDC transmitter input channel and is offered in three configurations with optional 2 or 4 relays, 4 or 8 set points and an isolated 4-20 mA repeater.

The general purpose two-wire pressure transmitter is offered in two termination packages and provides contact level measurement up to 69' or 21.1m of water column.

The general purpose two-wire pressure transmitter is offered in two configurations for different liquid types and provides contact level measurement up to 46' or 14m of water column.

The Flowline EchoPod® controller is a general purpose, ultrasonic sensor that provides non-contact level detection up to 98.4" (2.5m). 

The Flowline EchoPod® switch is an innovative level sensors that replaces floats, conductance and pressure sensors that fail due to dirty, sticking and scaling media in small tanks of 49.2" (1.25m) or less. 

The general purpose, DL10 ultrasonic sensor provides non-contact level measurement up to 49.2" (1.25m) with a 4-20 mA output.

The Flowline general purpose, DX10 ultrasonic sensor provides non-contact level measurement up to 49.2" (1.25m) with a 0-5 VDC, 0-10 VDC or 976-2000 Hz. frequency output.

The general purpose, ultrasonic sensor provides non-contact level detection up to 49.2" (1.25m) with 4 SPST 60 VA 1A relays.

The Flowline EchoSafe® level transmitter is explosion proof, two-wire ultrasonic transmitter and provides non-contact level measurement up to 10m in hazardous bulk storage, day tank and sump applications.

The Flowline EchoSonic II ultrasonic level transmitter which is a general-purpose two-wire ultrasonic transmitter provides non-contact level measurement up to 32.8’ (10 m).

The Flowline EchoSpanTM is a general-purpose two-wire ultrasonic transmitter that provides non-contact level measurement up to 32’or 10m.

The Flowline EchoSwitch II is a general-purpose ultrasonic switch and controller provides non-contact level detection up to 24.6’ (7.5 m).

The general purpose switch package provides up to five level switch points with a dry contact closure interface for remote devices such as a PLC or SCADA.

The general purpose two-wire, float transmitter provides contact level measurement up to 8' or 2.4m, and is ideally suited for relatively clean water, light weight oil or diluted corrosive liquids. 

The Flowline Flow-Point is a compact relay controller that provides a single channel low flow switch with one sensor input.

The Flowline Fluidwell is an explosion proof meter that is typically selected for use with an explosion proof transmitter within a hazardous area. 

Available in two classifications; CSA approved general purpose and isolation with built-in intrinsic safety barriers for use with associated apparatus.Each classification is offered in three versions with 1 or 2 relays and 1-3 sensor inputs.

The adjustable multi-point fitting enables users to install and adjust up to four Flowline level switches to any depth along the entire length of track.

The Flowline Smart-Trak with compact junction box is offered in CSA and Cenelec approved intrinsically safe or general purpose configurations.

The Flowline Smart-Trak with a compact relay controller is a general-purpose switch package which provides a complete solution for automatic filling or emptying of a tank between two adjustable level switch points.

Offered in both AC and DC powered configurations, the compact flash alarm brings immediate attention to process conditions.

Offered in CSA and Cenelec approved intrinsically safe or general purpose configurations, this high level spill prevention switch package provides a fixed level switch point with a 1A relay or dry contact closure interface for remote devices such as a PLC, SCADA or alarm.

The Flowline Switch-Pro with compact junction box is installed through the side wall and offered in CSA and Cenelec approved intrinsically safe or general purpose configurations. The product is typically selected for bulk storage, day tank and process vessel applications.

The Flowline SwitchPro with compact relay controller is a general purpose high or low level switch package which, includes a 10A compact relay controller for pump or valve actuation with an optional flash alarm. The product is typically selected for bulk storage, day tank and process vessel applications.

Offered in both vertical and horizontal float configurations, the general purpose mini-float level switches are a great choice for less critical applications with clean water and/or chemical solutions.

The general purpose non-intrusive capacitance level switch is a great choice for highly corrosive or ultrapure, aqueous based liquids with non-coating and/or scaling characteristics.

The general purpose optic leak detection switch is an excellent choice for leak detection in and around secondary containment sumps, tanks and pipes.

The general purpose guard capacitance level switch is a great choice for a wide range of aqueous based conductive liquids with light coating, crystallizing or scaling characteristics.

The Flowline Switch-Tek ultrasonic level switch is intrinsically safe use in general purpose or hazardous applications. 

The Flowline Switch-Tek vertical buoyance level switch is a general purpose buoyancy level switch which is a perfect choice for relatively clean water and chemical solutions with non-coating and/or scaling characteristics. Media examples include acetic acid and process water.

The general purpose buoyancy level switch is a great choice for relatively clean water and chemical solutions with non-coating and/or scaling characteristics. Media examples include sulfuric and hydrobromic acids.

The Flowline Switch-Tek vibration level switch is a great choice for dirty liquids including those with light to medium coating, scaling or foaming characteristics.

The Flowline Thermo-Flo thermal dispersion flow switch is an ideal choice for a wide range of relatively clean water and chemical solutions with non-coating and/or crystallizing characteristics. Media examples include deionized water and sulfuric acid. The product is broadly selected for low or no-flow applications.