Maltz Sales Company, distributor for Fluid Handling Equipment. Call the experts for help with your application.
The P60C-5 pH is the newest addition to the Aquametrix differential probe family. It's 1" NPT size allows it fit into tight spaces where the P60C-8 might be unwieldy.
AM series cells are made with stainless steel electrodes and body. This insures that, with reasonable maintenance, years of drift-free performance can be expected.
Water Analytics ES series electrodeless conductivity sensors are used in processes where conventional contacting sensors may become fouled or corroded.
The IP100/200 series are adjustable depth insertion paddlewheels that come in brass or 316 stainless models to fit 3” to 48” pipe.
The IP100/200-Series are adjustable depth insertion paddlewheels that come in brass or 316 stainless models to fit 3" to 48" pipe.
The IP80 series are impeller type (or “paddlewheel”) insertion sensors designed for use with a wide variety of liquids in pipe sizes 1/2" to 8".
A conductivity system is only as good as the sensor or cell which provides the signal to the analyzer or controller.
These combination probes provide an economical alternative to higher cost models.
These industrial combination pH or ORP probes use the conventional measurement technique employing a process pH glass electrode (platinum for ORP) which is compared to a reference electrode in KCL solution.
The P60C-4 pH and the R60C-4 ORP probe are dependable industrial grade sensors designed to provide accurate measurement and longer service life under the most demanding conditions.
This unique pH probe mounts in a standard 1 1/4” NPT tee, or in a tank, through a specially designed CPVC compression fitting.
The P60C-8 pH and the R60C-8 ORP probes are dependable industrial grade sensors designed to provide accurate measurement and longer service life under the most demanding conditions.
For added versatility, the P/R65C series, pH or ORP differential probes, are available with an integral encapsulated 4-20 mA two-wire transmitter to feed directly to a PLC or a DCS.
The sensor consist of a probe to which is fitted a cartridge that contains a precisely stretched permeable membrane, electrodes and electrolyte (p/n P91D).
These versatile impeller flowmeters are availalble in 3/8", 1/2”, 3/4”, and 1" nominal pipe sizes with female NPT threads (SAE optional).
The Burkert 8400 is an intelligent sensor/switch with an extra- large display is specifically designed to switch a valve and to establish a monitoring system or an ON/OFF control loop.
Heating, Cooling, & Plating Expert
67 Green StreetFoxboro, MA 02035
Phone: 508.203.2400 Toll Free: 800.370.0439 Fax: 508.203.2401
Questions? Feedback? powered by Olark live chat software