Maltz Sales Company, distributor for Fluid Handling Equipment. Call the experts for help with your application.
The general purpose two-wire, float transmitter provides contact level measurement up to 8' or 2.4m, and is ideally suited for relatively clean water, light weight oil or diluted corrosive liquids.
The Flowline Fluidwell is an explosion proof meter that is typically selected for use with an explosion proof transmitter within a hazardous area.
Available in two classifications; CSA approved general purpose and isolation with built-in intrinsic safety barriers for use with associated apparatus.
PP, PVDF Body & Ceramic Sensor Designed for Corrosive liquids, Excellent chemical resistance, Range: 0-225 PSI, Output: 4-20mA or 4-20mA + 2 Relays (LED)
The DC4500 is a bleed and feed cooling tower controller with dual biocide timers.
The Partlow MIC 1166 single loop high end controller may seem small, but it packs a punch with holding up to 4 programs of 16 free-format segments each and includes an event output.
The Partlow MIC 1460 is a 1/4 DIN microprocessor based, single loop process controller with programmable setpoint programs.
The Partlow MIC 1462 is a 1/4 DIN microprocessor based, single loop process controller with programmable setpoint programs.
The Partlow MIC 6000 is a 1/4 DIN, microprocessor based, single loop, profiling, process controller.
The SeaMetrics AO55 is a blind (non-indicating) 4-20 mA transmitter.
The Seametrics FT520 is a batching flow processor that has relay outputs, that can be used for batch control, regeneration control (softeners and filters) or high/low flow alarms.
The Seametrics FT400-Series are microcontroller-based indicator/transmitters that display flow rate and total and provide output signals.
For low cost signal conditioning, the Sensorex TX100 loop powered transmitter offers a, 2-wire 4-20 mA pH transmitter.
The Signet 5075 Totalizing Flow Monitor features a traditional analog dial for flow rate at a glance while the backlit LCD provides precision flow rate, total volume and programming information.
The Signet 5090 Sensor Powered Flow Monitor is the simplest and most economical instrument in the Signet offering.
The Signet 5500 Flow Monitor is an instrument that comes fully equipped with all of the basic tools needed for monitoring and controlling a flow system.
Heating, Cooling, & Plating Expert
67 Green StreetFoxboro, MA 02035
Phone: 508.203.2400 Toll Free: 800.370.0439 Fax: 508.203.2401
Questions? Feedback? powered by Olark live chat software