LMI - Digi-Pulse Flow Monitors

Features & Specifications:

Digi-Pulse™ Flow Monitors solve the age-old question “How do I know if my pump is pumping?” Pulsating flow of your pump can be monitored and transmitted using the LMI Digi-Pulse™ Flow Monitor. Designed to electrically signal a low or no flow condition, you can be assured of your pumping performance; an advantage when working with pulsating or very low flows. A transmitter can be connected to a remote counting or recording device. On LMI control code “9” series metering pumps the Digi-Pulse™ will provide the user with verification of pump performance. If the Digi-Pulse™ Flow Monitor detects output loss, it will shut the pump off and close a switch that may be tied to an alarm. The alarm signal may also be used to trigger a stand-by pump.

FEATURES:

Corrosion resistant PVDF
Senses pulsating metering pump flow
Adjustable, in-line
Flow range: ml/stroke Max. LMI Pump Output 0.1 - 5.0 7.9 GPH (30.0 l/h)
Usable as Adjustable Flow Switch for non-pulsating flow
Economical

INFORMATION:

Part No.	Description
Non-Liqipro Liquid Ends
FM-200	Without Valve Fitting
FM-200-9	Without Valve Fitting (for Series AA9, B9, C9)
FM-201	With PVDF 1/4" Tubing Connection
FM-202	With PVDF 3/8" Tubing Connection
FM-203	With PVDF 1/2" Tubing Connection
FM-204	With PVDF1/4" NPTM Connection
FM-301	With PVDF 1/2" Tubing Connection
FM-301-9	With PVDF 1/2" Tubing connection (for use with Series AA9, B9, C9)
FM-302	With PVDF 1/2" NPTM
FM-302-9	With PVDF 1/2" NPTM Connection (for use with Series AA9, B9, C9)
LiquiPro™ Liquid Ends (300, 400 series)
FM-PRO	Without Valve Fitting (LiquiPro™ liquid ends)
FM-PRO-9	Without Valve Fitting (LiquiPro™ liquid ends) (for use with Series AA9, B9, C9)
ROYTRONIC Liquid Ends (700, 800, 900 series)
FM-ROY	ROYTRONIC^® Series A and ROYTRONIC EXCEL™ AD2, AD8-- with loose wire conn.
FM-ROY-1	ROYTRONIC version with speaker jack conn for use with new 4FV with B9 or C9 pumps
FM-ROY-9	ROYTRONIC EXCEL™ AD9/ADN with 4-pin conn.