CART (0)
$0.00
Liquid handling requirements are much more involved than they were five years ago. The variety of liquids being handled has increased along with temperatures and pressures. Today’s installations demand quiet, smooth running pumps with long life.
The Flo King BX3000 Pump and Filter System weighs just over 20 lbs with a maximum flow rate of 3000 gph. Can be used with one, two or even four filter cartridges.
The Flo King BX5000 Pump and Filter System is excellent for larger tanks or anywhere aggressive agitation is needed.
The Flo King system enables you to pump, filter, agitate and treat your fluid in an all-in-one system.
The Flo King BXL2500 Pump and Filter System is designed for tanks where overhead clearance is a problem. The motor is inverted and positioned outside the tank.
The Flo King BXL5000 Pump and Filter System features a low-profile design to avoid above tank obstructions.
The Flo King Lab series is for laboratory, prototype and clean production operations in very small tanks or beakers.
The Finish Thompson VKC Series is a vertical sealless centrifugal pump.
The Hayward/Webster D1 Series vertical seal-less immersible pump is a smaller capacity pump with built-in reliability.
The Hayward/Webster S2 Series vertical pump is built in reliability. The all-plastic pump construction is a great fit for chemical applications.
The Hayward/Webster S4 Series vertical pump, when reliability is not just a requirement, but a necessity.
The Hayward/Webster SS7/SS8 Quick Service vertical immersible pumps are a rugged, non-metallic chemical duty pump.
The Penguin PX10 extended vertical immersible pumps are simple in design, efficient in performance, and self-priming when immersed in solution.
The Penguin PX15 extended vertical immersible pumps are simple in design, efficient in performance, and self-priming when immersed in solution.
The Penguin Vertical P Series pumps are compact, portable, and self-priming when immersed. Simple in design and efficient in performance, this pump has only one moving part.
The Penguin Vertical P2 Series pumps are compact, portable, and self-priming when immersed. Simple in design and efficient in performance, this pump has only one moving part.
The Price Pump CD-V Series is a vertical immersible pump constructed of 316 stainless steel.
RENNER vertical centrifugal immersion pumps are designed for vertical deployment in non-pressurized tanks, open basins or pits.
Serfilco’s 'EF' Vertical Pump Series represents the next generation of molded pumps from Serfilco with flows to 400 gpm at 60 Hz. It is a robust design to meet the most demanding applications while providing the economy of operation found in all of our molded pumps.The 'EF' features a cantilevered, sleeved, SS shaft with vapor seal to provide protection for the motor. The cantilevered shaft eliminates bearings and conventional pump seals, resulting in a pump that can run dry indefinitely without damage. This pump is offered in a choice of our exclusive PPP high temperature polypropylene or CPVC construction and, as with all of our vertical cantilever pumps, provides non-metallic solution contact.
Serfilco’s 'EH' Sump Pump Series features a cantilevered, sleeved, SS shaft with vapor seal between the rotating shaft and the support column to further protect the motor. The cantilevered shaft eliminates bearings and conventional pump seals, resulting in a pump that can run dry without damage. A compound impeller prevents liquid from rising in the column, even at maximum TDH, while the fully enclosed bottom impeller provides high hydraulic efficiency at low horsepower.
Serfilco’s 'EHM' Vertical Pump Series features a cantilevered CPVC sleeved SS shaft with vapor seal between the rotating shaft and the support column to protect the motor. The cantilevered shaft eliminates bearings and conventional pump seals, resulting in a pump that can run dry without damage.
Serfilco’s EO pump series benefits from proven design features gained through over 30 years of experience in developing chemically resistant vertical pumps. The unique design of this pump includes a fully sleeved SS shaft threaded into a chemical duty motor. This eliminates weak shaft connections, pump bearings, spindles, bushings and liners, resulting in a chemical duty pump which can run dry indefinitely, providing years of trouble-free service.
The Sethco Thermoplastic Chemical Sump Pump UD/UV Series heavy duty industrial sump pumps are ideally suited, structurally and hydraulically, for heavy-duty service. They provide outstanding mechanical strength at elevated temperatures and excellent chemical resistance to concentrated acids and alkalis.
Sethco's ZDX series pumps are specially designed for in-tank or out-of-tank use. They're built for heavy duty pumping of acid and alkaline solutions (pH 0/14) and other corrosive liquids.
Sethco's ZKX series pumps are specially designed for in-tank or out-of-tank use. They're built for heavy duty pumping of acid and alkaline solutions (pH 0/14) and other corrosive liquids.