The Burkert 8400 is an intelligent sensor/switch with an extra- large display is specifically designed to switch a valve and to establish a monitoring system or an ON/OFF control loop.

The Burkert S020 is an insertion fitting for flow measurements or analysis. 

The Burkert S030 is an INLINE fitting with paddlewheel for flow measurement.

The Burkert TST001 is a temperature thermometer with 1xPt100-temperature probe integrated in stainless steel tube.

The Burkert fitting can be used to connect any Insertion device for a measurement in the pipe. e. g. for flow, pH, oxidation reduction potential (O.R.P) and conductivity measurement.

The Burkert sensor-fitting S030 has a built-in paddle wheel to measure the flow rate. When liquid flows through the pipe, the paddle wheel is set in rotation producing pulses whose frequency is proportional to the flow rate.

The Flowline general purpose, DX10 ultrasonic sensor provides non-contact level measurement up to 49.2" (1.25m) with a 0-5 VDC, 0-10 VDC or 976-2000 Hz. frequency output.

The general purpose, ultrasonic sensor provides non-contact level detection up to 49.2" (1.25m) with 4 SPST 60 VA 1A relays.

Submersible Level Sensor

The Liquid Controls LC Mag Meter family of electromagnetic flow meters offers the best solution for measuring the flow of electrically conductive liquids.

The Seametrics CT2X Smart Sensor is a microprocessor-based submersible conductivity/temperature sensor with built-in data logging. This device stores thousands of records of conductivity, temperature, salinity, and total dissolved solids (TDS). The CT2X is also available with a depth/level option giving added functionality in the same sensor housing.

Seametrics’ DO2 Smart Sensor is the next generation in trouble-free oxygen sensing design. Utilizing fluorescence of a stable, immobilized ruthenium-based film matrix, the sensor provides precision optical transmission and detection to measure oxygen concentration in the fluid outside of the sensor. Equipped with integrated datalogger and Aqua4Plus software, this sensor provides convenient, high-quality data to the user.

This single unit can do the work of six sensors—all at the same time. Available in a variety of configurations to fit your needs. To make your work even simpler, this sensor comes standard with both SDI-12 and Modbus interfaces, an integrated datalogger, as well as wireless connectivity for cellular modems.

The Seametrics TempHionTM Smart Sensor is a microprocessor-based submersible sensor with built-in data logging. 

The Seametrics BaroSCOUT Smart Sensor is designed to measure barometric pressure, along with temperature. It is an ideal companion to our absolute pressure/level sensors and can be used to adjust their readings for atmospheric pressure.

Introducing the new LevelSCOUT 2X Absolute Level Logger, the next generation of our LevelSCOUT Series level and temperature sensors with integrated datalogging. Now equipped with more memory, increased protection, and more customization options, the LevelSCOUT 2X is designed to fit more applications and last longer than ever before. It’s constructed with 316 stainless steel, fluoropolymer, and acetal, providing highly accurate readings in rugged and corrosive field conditions

Replaces the LevelSCOUT as of December 31, 2021.

The Seametrics PS9800 pressure transmitters are rugged and accurate with great noise immunity, transient protection, and thermal performance.

The Seametrics PS98i pressure transmitters are rugged and accurate with great noise immunity, transient protection, and thermal performance.

The Seametrics PT12 Pressure/Temperature Sensor has been designed to provide trouble-free submersible operation in liquid environments. This sensor communicates via SDI-12 (v1.3) or Modbus® RTU (RS485)protocol.

The Seametrics PT12-BV comes as a weatherproof stand-alone box or with an automatic compensation wiring option. The PT12-BV measures pressure, temperature, and supply voltage.

The Seametrics PT2X Smart Sensor is an integrated data logger and pressure/temperature sensor and is ideal for monitoring groundwater, well, tank, and tidal levels, as well as for pump and slug testing. This sensor networks with all of the Seametrics Smart Sensor family.

The Seametrics PT2X-BV is a special version of the PT2X designed to measure barometric and vacuum pressure in reference to absolute pressure, along with temperature and time. It will measure pressure/ vacuum from 600 to 1100 millibars.

Offering both SDI12 and Modbus® interfaces, the Seametrics T1/T1R is a smart choice for upgrading to digital and replacing your analog temperature sensors. The T1/T1R’s rugged construction of 316 stainless steel, fluoropolymer, and PTFE resists weathering and data interferences, making it safe for long-term deployment.

Seametrics’ Turbo Sensor measures a wide range of NTUs, making it a versatile device capable of deployment at many different sites.

Sensorex 3-in-1 combination electrodes are excellent choices for applications requiring pH, reference, and automatic temperature compensation (ATC). The 3-in-1 electrode operates like three separate electrodes, at a value price, you would pay for only one electrode.

The Calibration Adapter (PN# S857) is used to calibrate modbus sensors. It threads on to the back of the smart sensor and it connects to a computer via a USB interface.

This product is to be used with only the modular version of our Smart Sensors, which include:

• S8000 Series pH and ORP Sensors
• CS8000 Series Conductivity Sensors

Sensorex's Calomel Free pH electrodes! 

The performance of a Calomel electrode is now available without the hazardous Mercury associated with the design. The "Calomel Free" design features an Ag/AgCl based double junction reference with a unique silver ion trap acting as a third junction to impede any silver ion contact with the sample. Reference output is adjusted to deliver the same output as a Calomel electrode using a silver chloride reference.

The Sensorex CS150 and CS150TC conductivity probes are a cost effective solution for measuring conductivity in light industrial and laboratory applications.

The Sensorex CS200 and CS200TC conductivity probes are a cost effective solution for measuring conductivity in light industrial and laboratory applications.

The Sensorex CS700 Conductivity Sensor is ideally suited for ultrapure/pure water, drinking water, and lower-conductivity drinking water applications. It’s durable in high-temperature (150° C / 302° F) and high-pressure environments (1,379 kpa / 200 psig), thanks to stainless steel and PEEK construction. In addition, quick installation is made possible via using compression fitting with 3/4” or 1/2” threads. Pick from three cell constants based on your application: 0.01, 0.1 (available soon) and 1.0 (available soon).

The Sensorex CS8000 Contacting Conductivity Sensor delivers accurate, reliable monitoring of conductivity and total dissolved solids (TDS). Sensor maintenance is simple with the detachable S855 Cable Assembly. The sensor package is assembled with an automatic temperature compensation (ATC) with optional integration for any conductivity transmitter or controller. Ideally suited for conductivity measurement applications ranging from ultra-pure water to cooling water.

Our DO6400 series of galvanic dissolved oxygen sensors deliver accurate measurements with very fast response time. Calibration is simple and only requires a single-point air calibration. Sensor directly outputs Millivolt, 4-20mA analog or MODBUS/RS485 digital signal scaled to the sensor range for easy PLC integration.

The FCL series (free chlorine sensors) feature amperometric measurement technology. Designed for disinfection applications in water treatment, for pools, etc., these sensors are available in three ranges for detecting ppm level of free chlorine. Choose the FCL502 for 0-2ppm, FCL505 for 0-5ppm and FCL510 for 0-10ppm of free chlorine.

The Sensorex HF Resistant Laboratory pH Electrodes are for use in hydrofluoric acid (HF). Please note 2 major differences as compared to standard electrodes. First, pH range is 0-12 not 0-14. Second, the temperature range is 0-50 deg C.

This series of electrodes are compatible with any lab or portable pH meter. Calibration of these electrodes is as normal with any standard pH electrode using standard pH buffer solutions.

Sensorex's Calibration Box is used to calibrate modbus sensors. The wires from the sensors connect to the terminal block on the front of the box. It connects to a computer via a USB interface.

The Sensorex Lumin-S optical dissolved oxygen sensor delivers reliable DO measurements over a long operating life. There are no membranes to replace, no electrolyte solutions to replenish, and no anodes to clean. Maintaining the sensor is as easy as replacing the optical sensing cap once every 1-2 years, and since all calibration data is stored on the cap, there’s no need to calibrate. This dissolved oxygen sensor outputs a Modbus/RS-485 digital signal for easy PLC integration.

The Sensorex ORP1000 is a durable and easy to use ORP sensor. Great for outdoor applications, such as monitoring swimming pool chlorine, this probe has built in protection for the ORP sensor surface. Use the ORP1000 with any ORP meter accepting a BNC connector.

When measuring samples such as wastewaster that may contain proteins, heavy metals, or other contaminants, it is important to use an ORP sensor (REDOX sensor) designed to withstand unpredictable chemical environments. The Sensorex ORP2000 features double junction reference protection, which prevents contamination by sample components that interact with silver (Ag). The durable Ultem® body ensures extensive chemical compatibility, making the ORP2000 a highly versatile analytical tool.

In harsh laboratory or field conditions, where heat, moisture, or corrosive chemicals may damage equipment, ORP electrode durability is key. The Sensorex ORP3000 is durable, research grade ORP electrode. All the functional components – the ORP measurement surface, the meter connection, and the cable connection – are reinforced with protective elements. Durable Ultem® body construction provides extensive chemical compatibility and withstands temperatures up to 100°C.

The Sensorex pH Detectors are designed for use with a variety of instrumental techniques such as FIA, HPLC and IEF and are also used to continuously monitor the pH of low volume flows in bench scale chemical systems. The pH detector system is specially designed to achieve ultra fast response times. A flat surface pH electrode (S450CD) located at the top of the flow cavity allows for very low internal volumes. The resulting rectangular cross-section flow path has no protruding parts which could interfere with a clean sweeping flow.

Whether you need to measure pH in your swimming pool, aquarium, or hydroponics garden, you need a probe that will deliver accurate measurements day in and day out. The Sensorex pH1000 polycarbonate pH sensor provides reliable, stable readings in a range of environments, from greenhouses to science classrooms. This sensor stands up to the usual wear and tear with its durable polycarbonate body and built-in protection for the pH glass measuring surface. Compatible with all pH meters accepting a BNC connector.

Whether you are a student measuring pH in a lab or a business owner monitoring plant or crop health, you need a pH electrode that will consistently deliver accurate measurements. If you deal with a wide variety of chemicals or any aggressive substances, the Sensorex glass probe pH1400 (formerly SG201C) is a safe choice due to the chemically inert properties of glass. This basic, single junction electrode has a refillable reference cell, allowing users to maintain measurement precision throughout the sensor lifetime.

The Sensorex pH2000 (formerly S200CD) has a double junction reference design to prevent reference fouling by heavy metals and other sample contaminants. When you travel to remote sites to collect data, it is especially important that obtaining the measurements you need is hassle free. The pH2000 features an Ultem® body and a booted meter connection for durability you can trust in the field.

Agar plates, skin, and electrophoresis gels are all surfaces that may be difficult to measure with a typical glass bulb electrode due to concerns about bulb breakage. To facilitate these and other surface measurements, Sensorex created the pH2100 flat tip pH electrode. It has a rugged flat measurement surface, which breaks less easily when it comes in contact with hard materials. This makes it a great choice for measuring slurries, sludges, and viscous samples as well as those containing suspended solids.

Looking to measure the pH of soil, meat, or cheese? A standard pH sensor with bulb shaped glass won’t effectively pierce the surface of these semi-solids; the pH glass may even crack. Sensorex has created the pH2200 spear tip pH sensor, specially designed to penetrate semi-solid surfaces for effective pH measurement. The sensor is assembled with a bio-friendly Ultem® body, making it safe for use in food and soil. Use this durable pH sensor at home or in the field with any pH meter accepting a BNC connector.