CART (0)
$0.00
Tubing Connector Assembly PVC, .5" O.D. Tubing x 1/2" NPT M
LMI Shaft Seal
Valve Seat, PP
Ball .500 SS
Ring, Seal .500 Teflon
Spring Stainless Steel.42 X .24 X 1.0
Liquifram 6.0Fluorofilm (non fabric)
Screw 10-24 X.75 PH SS
Suction Valve AssemblyLE-92T
Foot Valve AssemblyLE30/36
Clamp Ring 3/8" Outside Diameter Tubing
Ball Guide.500 Diameter
The Flex-Pro A2 Series Peristaltic Pump is for high pressure and high accuracy applications.
Flex-Pro A3 Series Peristaltic Pump for high pressure and high accuracy applications.Feed Rates to 35.19 GPHPressures to 125 PSI4-20mA (A3V only), Pulse Input (A3V only) and Manual Speed Control2500:1 Turndown ratioPatented Tube Failure DetectionBrushless DC MotorNEMA 4X (IP 66) Washdown2 Year WarrantyNEW! Flex-A-Prene® Tubing with more than 4X longer tube life.Patented Tube Failure DetectionQuick Disconnect Fittings Available for Flex-A-Prene
Flex-Pro A4 Series Peristaltic Pump for high pressure and high accuracy applications.
The A-100N FlexFlo Peristaltic Pump
Activated Granular Carbon Sells:
The LK Series metering pump is the largest in the high performance line of pumps from Walchem. The LK is a motor-driven, mechanically actuated diaphragm metering pump with a maximum capacity of 114 GPH (432 l/h) and a maximum pressure of 225 PSI (1.5 MPa). The heart of the LK is a compact and very reliable dual-cam system drive and worm gear reducer. Roller bearings and oil bath lubrication ensure out- standing durability and wear resistance in continuous operation.
The Sandpiper 1" Standard Duty Ball Metallic AOD Pump is ideally suited for intermittent / on-demand, portable, moderately abrasive fluids, and suspended solids.
Serfilco’s 'EF' Vertical Pump Series represents the next generation of molded pumps from Serfilco with flows to 400 gpm at 60 Hz. It is a robust design to meet the most demanding applications while providing the economy of operation found in all of our molded pumps.The 'EF' features a cantilevered, sleeved, SS shaft with vapor seal to provide protection for the motor. The cantilevered shaft eliminates bearings and conventional pump seals, resulting in a pump that can run dry indefinitely without damage. This pump is offered in a choice of our exclusive PPP high temperature polypropylene or CPVC construction and, as with all of our vertical cantilever pumps, provides non-metallic solution contact.
Serfilco’s 'EH' Sump Pump Series features a cantilevered, sleeved, SS shaft with vapor seal between the rotating shaft and the support column to further protect the motor. The cantilevered shaft eliminates bearings and conventional pump seals, resulting in a pump that can run dry without damage. A compound impeller prevents liquid from rising in the column, even at maximum TDH, while the fully enclosed bottom impeller provides high hydraulic efficiency at low horsepower.
Serfilco’s 'EHM' Vertical Pump Series features a cantilevered CPVC sleeved SS shaft with vapor seal between the rotating shaft and the support column to protect the motor. The cantilevered shaft eliminates bearings and conventional pump seals, resulting in a pump that can run dry without damage.
Serfilco’s EO pump series benefits from proven design features gained through over 30 years of experience in developing chemically resistant vertical pumps. The unique design of this pump includes a fully sleeved SS shaft threaded into a chemical duty motor. This eliminates weak shaft connections, pump bearings, spindles, bushings and liners, resulting in a chemical duty pump which can run dry indefinitely, providing years of trouble-free service.
The Serfilco's HE Horizontal Pump Series is totally enclosed and the impeller is molded to close tolerances which allow this pump to operate at peak horsepower efficiency across a broad range of operational flow/head requirements. The external mechanical seal and impeller sleeve design isolates metal components to provide non-metallic solution contact with the pumped solution.
Serfilco 3/8” Ser-Ductor Nozzle, Polypropylene part for use with a SER-DUCTOR system provides solution agitation with a centrifugal pump by drawing liquid from a tank and returning it to the tank through a sparger system, similar to that used for air agitation, with eductors strategically placed along the sparger pipe.
Serfilco 3/8” Ser-Ductor Nozzle, CPVC part for use with a SER-DUCTOR system provides solution agitation with a centrifugal pump by drawing liquid from a tank and returning it to the tank through a sparger system, similar to that used for air agitation, with eductors strategically placed along the sparger pipe.
Serfilco's 303SS Drive Shaft part for ‘EHLX’ Vertical Pumps (18”) replacement part for EH and EHH vertical pumps. * This part is not compatible for the standard length ‘EH’ Vertical Pumps
The EWN-R Series electronic metering pumps offer superior high speed dosing capability with more standard features. The flexibility of the EWN-R pump enable it be integrated into virtually any chemical feed application using a universal-voltage, digital controller with an expanded set of control features. Superb valve performance and advanced solenoid engineering combine to make a highly precise pump for the most demanding applications.
The Sandpiper 1 1/2" Standard Duty Ball Non-Metallic AOD Pump is ideally suited for intermittent / on-demand, portable, moderately abrasive fluids, and suspended solids.
Sethco's ZKX series pumps are specially designed for in-tank or out-of-tank use. They're built for heavy duty pumping of acid and alkaline solutions (pH 0/14) and other corrosive liquids.
Walchem Orifice Union, 3⁄4", with 4 Orifice plates, 0-1000 psi. Orifice Unions offer back pressure and flow control, limited by the available orifice sizes. Each union is supplied with four plates.
Walchem in-line mounting nut for low pressure sensor mounting or WEL electrode mounting
Standard Duty AOD Pump are ideally suited for intermittent / on-demand, portable, moderately abrasive fluids, and suspended solids.
The Sandpiper 1/2" Standard Duty Ball Metallic AOD Pump are ideally suited for intermittent / on-demand, portable, moderately abrasive fluids, and suspended solids.
The Sandpiper PB1⁄4 Non-Metallic Pumps Standard Duty AOD Pump are ideally suited for intermittent / on-demand, portable, moderately abrasive fluids, and suspended solids.
Iwaki WMD Series-40RLT Pump - Iwaki America, the world leader in small magnetically coupled centrifugal pump technology, offers the premier line of non-metallic centrifugal pumps.
