Banjo Polypropylene Self-Priming Centrifugal electric motor drive pumps are the designed for alkalis, acids, solvents, corrosives, water treatment, plating and pharmaceutical applications.
Beckson 236 series
of hand pumps
eliminate the dangerous practice of
lifting or tilting drums and carboys.
The XP-KZN Heavy Duty Submersible Slurry Pumps are specifically designed for tough conditions where explosion-proof, FM, C/US approved (Class I, Division 1, Group C & D) are needed.
BJM Pumps has a fantastic little utility pump for areas where conventional line power is not available. The Baby is available in a manual or automatic configuration.
The J-Series electric submersible pumps offer top performance and high quality for a very modest investment.
The BJM Pumps JF/JXF Series is part of the FARENHEITTM
pump series, which handle corrosive or non-corrosive, clear or solids laden liquids up to 200°F.
The BJM JX Series 316 Stainless Steel Pumps are corrosion resistant sump pumps.
The BJM Pumps KB Series is a heavy-duty dewatering, light slurry agitator pump.
The BJM Pumps high capacity, hard metal submersible slurry pumps with agitator is the choice of industries that face the most difficult pumping. Used in mining & coal mining, mineral processing, sand & gravel, steel production, lime slurry-fly ash, hydraulic fracturing, slurry transport, drilling operations - drilling mud.
The BJM Pumps KZN Series is designed to handle very abrasive applications.
The BJM Pumps KZN-HYD Series is the hydraulic version of the very popular KZN Series Heavy Duty Submersible Slurry Pump with agitator.
KZNF Heavy Duty Submersible Slurry Pumps with agitator is the choice of industries that face the most difficult pumping of liquids and solids.
The KZNRF HI-HARD™ pumps have proprietary process hardened ductile iron volutes.
BJM Pumps’ LWA® Series pumps are tough and durable. They are designed and constructed for dewatering sand, silt, coal fines and abrasive light slurries. These economical hard metal pumps are built to outlast rubber-lined and cast iron pumps and to keep your production running to save you repair and downtime costs.
Perfecta Pump GF32-9 Submersible Pump - Ideal for pumping everything from contaminated, dirty water, corrosive liquids to light dewatering.
The BJM IGF32-9 Pump is made of super tough Noryl material, 316SS shaft & fasteners and FKM elastomers.
The BJM Pumps Perfecta® Series Pump is ideal for pumping everything from contaminated dirty water, corrosive liquids to light dewatering.
The BJM Pumps Bullet Pumps (R-Series submersible pumps) are ideal for dewatering construction sites, mines, and circulating fountain water or for all-around use in industrial plants and utilities.
The BJM Pumps RX Series are top discharge pumps that pass the liquid up and around the motor before discharging.
The BJM Pumps S Series electric submersible cast iron pump is available with a single or double vane impellers and is designed for municipal, industrial and agricultural wastewater.
The BJM Pumps SK Series are Shredder pumps which have tungsten carbide cutting tip(s) which help shred solids that would clog an ordinary pump. Perfect for sump pits, agricultural and animal waste.
The BJM Pumps SKF/SKXF Series is part of the FARENHEIT pump series, which handle corrosive or non-corrosive, clear or solids laden liquids up to 200°.
The BJM Pump featuring patented RAD-AX® Dual Shredding Technology, SKG Series is designed to obliterate flushable wipes and other difficult solids in municipal and industrial wastewater applications. Items previously considered difficult or near impossible to pump are effectively handled through the innovative design of the SKG. The robust construction prevents downtime and reduces maintenance for longer life.
The BJM pumps SKX Series is a 316 stainless steel shredder pumps which utilizes Tungsten Carbide cutting tip(s) to shred solids that would clog an ordinary pump.
The BJM Pumps SV Series pumps are equipped with Vortex type impellers, undoubtedly the best non-clog impellers ever invented.
The BJM Pumps SX Series electric submersible pumps are available with single vane or double vane impellers for municipal, industrial and agricultural wastewater.
The BJM Pumps XP-SK Series is an Explosion Proof Electric Submersible Pump with Shredder Action Impellers for use in Class 1, Division 1, and Groups C & D Hazardous Locations.
Accumulators are storage vessels that hold fluid under pressure and are commonly used in fluid power systems to store fluid as energy to be released on demand.
Introducing Blacoh's all-new pulsation dampener designed specifically for AODD pumps.
Prevent siphoning and stabilize dosage rates with SENTINEL Diaphragm Back Pressure Valves.
Designed for environments where an air compressor's power, noise and maintenance requirements are simply unacceptable.
Blacoh’s Sentinel 316 Stainless Steel Check Valves ensure chemical flow only goes in one direction, with quality-machined construction for reliability and maximum performance.
Representing a major breakthrough in surge vessel design, our innovative corrosion resistant vessels are constructed out of Spin Welding thermoplastic with sizes from 60-1000 US gallons and pressures up to 725psig (50bar.)
Protect pumping systems from pressure damage with SENTINEL Diaphragm Pressure Relief Valves.
Our SENTINEL Diaphragm Seals protect and isolate all forms of system instrumentation from hazardous and corrosive process fluids… unconditionally guaranteed!
Positive displacement (PD) pumps contain an inlet valve that alternately opens and closes, creating an acceleration and deceleration of fluid into the pump.
Positive Displacement (PD) pumps create pulsation and hydraulic shock due to the reciprocating nature of their stroking action, potentially damaging the entire pumping system.
Prevent costly and hazardous spills when AODD pump diaphragms fail. The fully pneumatic SPILLSTOP system safely captures leaked product and automatically shuts down failed pumps to eliminate costly product loss and prevent hazardous spills. Optional warning alarm and backup pump switchover further minimize system downtime for maximum productivity.
Super Duplex pressure vessels for desalination plants and offshore oil platform water flood applications and cryogenic applications.
Demanding chemical processing applications often require a surge vessel to have a lining that offers far more robust strength and longevity than a standard coating.
The Blue-White CHEM-FEED® CD1 Multi-Diaphragm Metering Pump does not lose prime when pumping chemicals that off-gas, thanks to the exclusive Hyperdrive Technology which creates smooth chemical feed.
Technical Overview:GPH: .004 - 7.70LPH: .015 - 29PSI: 150Bar: 10.3Enclosure Rating: NEMA 4X (IP66)Standards: CE, cETLus, RoHSControl Methods: Manual, Remote AnalogPower Supply: 100 to 240VAC-50/60Hz
The Blue-White A-100N FlexFlo Peristaltic Pump
The CHEM-FEED® C-600P Diaphragm Metering Pump is a simple and economical solution to a wide range of commercial and industrial fluid process applications. This compact pump features an all-ball bearing, permanently lubricated gear motor for smooth, powerful, and quiet operation. Stroke adjustment from 4-100% permits accurate small injections at a high rate per minute.Techncial Overview:
Forgot your password?
Thank you for contacting us!
Your message has been sent and someone will be contacting you shortly.
In the meantime, if you have any questions please feel free to call us at 800.370.0439.
The Maltz Sales Team