CART (0)
$0.00
Truflo - OBS-DGO Plastic Gauge
Truflo - OBS-ED Series LED Digital Gauge
Truflo - OBS-GO Plastic Gauge
Truflo - OBS-R 360 Rotator Gauge
Truflo - Pulsepro Pulsation Dampener Series
The Truflo® Paddlewheel Flow Meter provides High Accuracy at Low Cost and is ideal for plastic piping.
Walchem Motorized Ball Valve, Boiler, 1/2" , 120V. The motorized ball valve delivers a torque of 150 in-lbs using a non-reversing motor, opening the valve in 5 seconds and minimizing pressure hammer.
Walchem 1/2" Valve Cartridge
Walchem 3/4" In-Line Mounting Tee
Walchem Orifice Union, 3⁄4", with 4 Orifice plates, 0-1000 psi. Orifice Unions offer back pressure and flow control, limited by the available orifice sizes. Each union is supplied with four plates.
Walchem Probe Tee, 3/4" NPTF, Low Pressure contacting conductivity, pH/ORP
Walchem Solenoid Valve, Cooling Tower, 3/4" , 120V
Walchem 3/8" Auto Air Vent Valve
Walchem 3/8" VC Injection Check Valve
Walchem 3/8" VE Foot Valve
Walchem 3/8" VE Injection Check Valve
Walchem 4-Pin Connector Assembly
Walchem 5-Pin Connector Assembly
Walchem 5/8" Valve Cartridge
Provide positive discharge pressure to stabilize pump output and prevent syphoning.
The new Auto Degassing Valve greatly improves the degassing capabilities of the E-Series metering pumps. The new design uses a dual check valve system to maintain proper pump operation to vent gas out the valve and back to the supply source.
Walchem Back-Pressure Valve
The Walchem Calibration Columns provide verification of metering pump output. Constructed from clear PVC, Glass, or PP with graduations in milliliters and GPH.
Contacting conductivity sensors measure conductivity of a solution via electrodes.
Walchem’s copper and nickel sensors are optoelectronic devices that are used in conjunction with Walchem’s on-line analyzers in a variety of applications including electroless copper or nickel baths, micro-etch baths and a number of other chemistries that contain more than 0.10 grams/liter (g/L) of copper or nickel ions.
Walchem's Corrater - Rohrback Corrosion Transmitter
Walchem's amperometric disinfection sensors offer a cost effective and reliable solution to your disinfection control requirements.
Walchem - Disinfection Sensors – Non Membrane
Walchem Electrode for WCT/WDT400
Electrodeless conductivity sensors measure conductivity of a solution utilizing encapsulated, non-contacting, toroidal technology.
Walchem's flow control valves will fine tune the blow down flow rate of your boiler.
Walchem flow switch manifold, low pressure contacting conductivity with 20 foot cable
Walchem Flow Switch Manifold switch assembly
Provides low cost flow verification on the suction side of E-Series pumps
Walchem Fluent is a cloud-based, water treatment management software tool that amplifies the value of Walchem controllers that have Internet access.
If your water treatment chemical supplier can provide inhibitor with PTSA or Fluorescein fluorescent dye in the formulation, the Little Dipper 2 makes it easy for our WebMaster to measure and control the concentration!
The Handheld Little Dipper is a small, lightweight, highly durable handheld fluorometer ideal for quick measurements in the field.
Higher temperature rating, steam sterilizable, high operating pressure and waterproof cable.
Walchem in-line mounting nut for low pressure sensor mounting or WEL electrode mounting
Walchem's NEW Intuition-6 controller with Pyxis’ rugged chlorine and chlorine dioxide sensors has never been easier thanks to the new WPD Series disinfection controller models.
NEW Intuition-9 Water Treatment Controllers - Unparalleled versatility and powerful programming for complete control of chemical metering pumps and valves in a broad range of water treatment applications.
The Walchem level switch will provide simple low tank level input for controllers and solenoid metering pumps.
Walchem Membrane Cap, 20 ppm Free Chlorine/Bromine (Extended pH range) and 20 ppm Total Chlorine