CART (0)
$0.00
The Hayward EVR Series reversing electric actuators are economical, high performance actuator for use with all true union ball valves, three-way ball valves, and butterfly valves up to 4" in size.
The Hayward Needle Valves are used for accurate metering of fluids. Turning the thumb-wheel moves a tapered piston into the PTFE seat to control the flow down to a few drops per minute. Precision-molded, fine-pitched stem threads permit this very fine metering flow control.
The Hayward PAD Series pneumatic actuators are corrosion-resistant air-to-air (double acting) quarter-turn actuator for use with ball valves up to 2" in size.
The Hayward Pressure Regulators prevent downstream pressure from exceeding a preset pressure. When the upstream pressure increases beyond the set pressure of the regulator, the regulator prevents the downstream pressure from exceeding the set pressure.
The Hayward Pressure Relief Valves protect piping system components from damage due to over pressurization.
The Hayward ProFile2TM corrosion resistant, proportional control ball valves provide two linear flow curves – one for fast opening, one for slow opening. The percentage of flow through the valves with either flow curve is equal to the degree of opening.
Hayward’s Spring Loaded Y Check valves give positive protection against reversal of flow in a piping system – even in the absence of backpressure.
The Hayward all-plastic swing check valves have up to twice the temperature/pressure rating of other plastic swing check valves...and can often replace metal valves in many applications.
The Hayward true union ball valves are constructed of rugged, heavy wall plastic and stands up to the most aggressive of applications.
The Hayward Manual Three-Way Ball Valves come standard with a two port “TW” ball allowing for three flow configurations within 180° of rotation. Hayward all-plastic Three-Way Valves contain no metal parts.
The Hayward Y Check Valves prevents reversal of flow in piping systems. They are ideal where back flow could potentially cause damage to pumps, filters or process equipment.
The ICON 100 Series Submersible Level Sensor Transmitter provides continuous level measurement for both corrosive and non-corrosive liquids. These submersible tank level sensors have been designed for the toughest industrial applications.
ICON - ITC 8000 Series Universal Data Logger
The ICON LP200 Pressure Transmitter was designed to measure Pressure or Level within industry’s most demanding corrosive process applications. When measuring pressure It can be mounted vertically or horizontally, and can easily be installed into a threaded process pipe tee fitting.
The ProAlert® 2 Visual | Audible Sentry Alarm with an array of powerful features designed to provide the utmost protection and immediate response in the event of leaks or spills. Engineered with the latest technology and a variety of advanced features, this alarm is your ultimate safeguard against leaks and potential hazards.
The ICON Sentinel Series is a Battery Operated Remote Tank Level Monitoring system that delivers reliable daily measurements that are both scheduled and event driven. Remote tank level monitoring with the Sentinel is exceptionally flexible, eliminating the hassles of network infrastructures and Internet service.
The ICON TVL Series LED Level Process Display and Controller is the industry's most rugged and reliable wall-mount remote level display.
The Liquid Controls LC Mag Meter family of electromagnetic flow meters offers the best solution for measuring the flow of electrically conductive liquids.
The Liquid Controls LC Mass by Rheonik is a patented Coriolis mass flow meter with unique construction features that solve the problem of directly measuring the mass flow of liquids and gases.
The Liquid Controls positive displacement meters provide exceptionally accurate service when using the unique metering principle, even under variable operating conditions (changes in temperature, pressure and viscosity).
The standard Liquid Controls LC Turbine Meters offer unsurpassed accuracy, efficiency and service life, and meets most liquid or gas flow measurement applications.
LMI's diaphragm back pressure/anti-syphon valves apply positive discharge pressure to a metering pump system and act to stabilize the output of higher output LMI Metering Pumps when pumping into low or no-pressure systems.
Installation of a calibration cylinder on the suction side of your LMI pump simplifies calibration.
The DC4000 may be programmed as a bleed and feed cooling tower controller or boiler controller.
Optimize Cooling Tower and Boiler Feed ProcessesThe LIQUITRON™ DC4000 Series Conductivity Controller is a microprocessor based control system that will operate in a variety of water treatment applications. Designed specifically as a bleed and feed cooling tower controller or boiler controller.The DC4000 provides a set point and relay for conductivity control, and a variety of timer functions to control chemical addition.Programming this controller is simple and is accomplished using only three keys.The backlit LCD display and LEDs provide visual indication of operating conditions and equipment status.
The DC4500 is a bleed and feed cooling tower controller with dual biocide timers.
Control Cooling Tower Water Treatment with ConfidenceThe LIQUITRON DC4500 Series Conductivity Controller is a microprocessor-based control system that will operate in a variety of water treatment applications. The DC4500 controller provides a set point and relay for conductivity control with a variety of timer functions to control chemical addition, including dual biocides. Pumps may be controlled in either ON/OFF or external trigger mode.Controller programming is intuitive and requires only three keys. The backlit LCD display provides a visual indication of operating conditions and equipment status to give you the most control over your water treatment process.
Digi-Pulse™ Flow Monitors solve the age-old question “How do I know if my pump is pumping?” Pulsating flow of your pump can be monitored and transmitted using the LMI Digi-Pulse™ Flow Monitor.
The DP5000 pH Controller is designed for a variety of industrial pH applications including water treatment, metal finishing, PCB manufacturing and waste treatment.
CONTROL YOUR PROCESS WITH FLEXIBILITYThe LIQUITRON™ DP5000 Series is a dual channel pH Controller providing either relay or proportional pulse outputs to drive chemical metering pumps. A custom backlit display provides constant information regarding controller conditions with convenient easy to use navigation.High and low alarm points, delay and limit timers, and other programmable features make the DP5000 the most adaptive pH controller available for your chemical feed system.
The DR5000 ORP Controller is designed to control LMI Metering Pumps for the addition of oxidizing and reducing agents.
The FS5000 Flow Switch Controller is designed for use in applications that require flow/no-flow control of metering pumps and other devices.
LMI's Remote Programmable Flowmeter Pulser (RFP) provides a simple method to feed chemical in proportion to water flow.
Compact digital time switch is capable of operating two pumps or one pump and one valve for simultaneous operation of feed and bleed.
This molded polypropylene wall mount bracket is rugged and chemically resistant.
Maltz Sales Company provides pH buffers as pre-mixed, ready-to-use, color-coded liquids: red (pH4.01), yellow (pH7.00) and blue (pH 10.00).
Myron L Pocket Ultrapen Series Tester Pen for pH & Temperature - this instrument is designed to be extremely accurate, fast and simple to use in diverse water quality applications.
AirGate-Modbus is a wireless multifunctional gateway that allows the transparent and each insertion of wireless branches into existing wired RS485 networks.
The DigiRail line of smart transmitters with Modbus RTU comunication interface provide a simple way for integrating analog or digital signals to supervisory systems.
FieldLogger is a versatile, powerful and yet cost effective data logger handling analog, digital and other types of variables with high resolution and speed.
N1200 is an advanced self-adaptive PID controller with an algorithm that constantly monitors the process performance and adjusts PID settings in order to always obtain the best possible control response.
The N1500 series of Universal Process Indicators are high performance instruments used for monitoring analog signals in the vast majority of industrial and laboratory processes.
Rugged and compact, the OAKTON microprocessor-based portable ACORN Series pH 5 meters offer high accuracy at an extremely affordable price! These are our most economical pH meters.
Rugged and compact, the OAKTON microprocessor-based portable ACORN Series pH 6 meters offer high accuracy at an extremely affordable price! These are our most economical pH meters.