CART (0)
$0.00
For low cost signal conditioning, the Sensorex TX100 loop powered transmitter offers a, 2-wire 4-20 mA pH transmitter.
S8000, Unity Gain Amplifier (pH Amp) - battery-powered.
Our UVT-LED-H Handheld UV Transmittance Monitor is ergonomic, lightweight, and simple to use.
The Sensorex UVT-LED-PW Online UV Transmittance Monitor delivers accurate, reliable UVT measurements with minimal maintenance through the patented automatic cleaning and calibration wiper mechanism.
The UVT-LED-SW Submersible UV Transmittance Sensor provides reliable UVT testing for UV disinfection optimization.
Sigmamotor back pressure valves prevent siphoning and varying rates of dosage from fluctuating downstream pressure by enacting positive discharge pressure in your metering pump system.
Sigmamotor pressure relief valves operate when the system pressure raises above the set pressure of the valve to protect systems from damage due to blockages or excessive pressure situations.
Sigmamotor Calibration Cylinders will enhance your feed systems by allowing verification of the flow rate of the feed pump.
The Signet 2000 MicroFlow Rotor Sensor is constructed of Polyphenylene Sulfide (PPS), which provides high material strength.
Engineered specifically for small pipe diameter applications, the Signet 2100 Turbine Flow Sensor provides accurate readings in two flow ranges: 0.3 to 3.8 lpm and 3 to 38 lpm (0.1 to 1 gpm and 0.8 to 10 gpm).
The Signet 2350 Temperature Sensor has a one-piece injection molded PVDF body that is ideal for use in high purity applications. It also outlasts metal sensors in aggressive liquids and eliminates the need for costly custom thermowells.
The Signet 2450 Pressure Sensor has a one- piece injection molded PVDF body and ceramic diaphragm for superior compatibility in corrosive liquids.
The Signet 2507 Mini Flow Rotor Sensor contains a free-running rotor that is driven by the fluid flow. Within the given measurement range, the rotational speed of the rotor is proportional to the fluid flow rate.
Signet 2536 Rotor-X Paddlewheel Flow Sensors are highly repeatable, rugged sensors that offer exceptional value with little or no maintenance. The sensor is simple to install with time-honored reliable performance.
The Signet 2537 Flow Sensor offers low flow, low power and high resolution and can be configured on-site directly through the built-in user interface.
The Signet 2540 Paddlewheel Flow Sensor offers the strength and corrosion resistance of stainless steel for liquid applications with low velocity measurements.
The Signet 2724-2726 pH and ORP Electrodes features a patented reference electrode design and uses the unique foul-proof patented DryLoc® connector. The large area PE reference junction and pathway is constructed to increase the total reference effectiveness and ensures long service life.
The 2760 is a preamplifier that allows any DryLoc® pH/ORP electrode to work with most Signet instruments.
The Signet 2764-2767 Differential pH/ORP electrodes use the field proven 3-electrode differential technique.
The Signet Conductivity/Resistivity Electrodes are designed to provide versatile installation and accurate sensing across a very broad dynamic range.
The Signet 2850 Conductivity/Resistivity Sensor Electronics are available in various configurations for maximum installation flexibility.
The Signet 5075 Totalizing Flow Monitor features a traditional analog dial for flow rate at a glance while the backlit LCD provides precision flow rate, total volume and programming information.
The Signet 5090 Sensor Powered Flow Monitor is the simplest and most economical instrument in the Signet offering.
The Signet 515 Rotor-X Paddlewheel flow sensors are highly repeatable, rugged sensors that offer exceptional value with little or no maintenance.
The Signet 525 Metalex Paddlewheel flow sensors combines stainless steel construction with insertion paddlewheel technology.
The Signet 5500 Flow Monitor is an instrument that comes fully equipped with all of the basic tools needed for monitoring and controlling a flow system.
The Signet 5600 Batch Controller provides control capability and process fine-tuning in a familiar package.
The Signet 5700 pH/ORP Monitor is a versatile and intelligent instrument that recognizes the type of sensor connected, either pH or ORP, then automatically sets itself for the corresponding display and functionality.
The Signet 5800 ProPoint Conductivity Monitor features a unique analog/digital display, making it the preferred measurement instrument for applications requiring routine monitoring.
The Signet 8150 Battery Operated Flow Totalizer will provide years of dependable operation.
The Signet 8350 temperature sensor/transmitter offers local or remote display with current and relay outputs.
The Signet 8450 Pressure Transmitter is a unique instrument that offers local or remote display with current and relay outputs.
Signet 8550 Flow Transmitters are advanced instruments that convert signals from all Signet flow sensors into a 4 to 20 mA signal for long distance transmission.
The Signet 8750 pH/ORP Transmitter is designed for broad application and ease of setup and use.
The Signet 8850 Conductivity Transmitter is designed for multiple installation capabilities, simple set-up and easy operation, thus satisfying a broad range of application requirements.
The Signet 8900 Multi-Parameter Controller takes the concept of modularity to the extreme.
The CVS 4200 Indoor Stationary Sampler is designed to take samples reliably for years and years.
The Mettler Toledo/Thornton M300 Dual Channel Meter series of process analytical instruments provide single-channel, multi-channel and multi-parameter models to measure conductivity, resistivity, pH/ORP, dissolved oxygen, ozone and flow rate.
The Mettler Toledo/Thornton M400 transmitter series offers full ISM functionalities with “Plug and Measure” feature and advanced diagnostics.
Truflo - 2Vu Doubled Sided Gauge
Truflo - BAG "Big Ass Gauge" Series
Truflo - LD Leak Detection Switch
Truflo - LSS Flow Meter
Truflo - NC-25 Flow/Level Switch