The 8035 by Burkert is an INLINE flow transmitter/batching unit.
The 8055 by Burkert is a full bore mag flow meter for continuous or batch control.
The Burkert 8136 is an OEM radar transmitter, for aggressive media level measurement.
The Burkert 8137 is a general-purpose high-pressure radar level transmitter.
The Burkert 8175 is an ultrasonic non-contact level transmitter.
The Burkert 8323 pressure transmitter is designed to cover the majority of industrial applications in the field of industrial pressure measurement technology.
The Burkert 8327 intrinsically safe pressure transmitter is designed to cover the majority of industrial applications in the field of industrial pressure measurement technology.
The general purpose controller has a graphic display with four 4-20 mA transmitter input channels and 6 programmable relays.
The general purpose two-wire pressure transmitter is offered in two termination packages and provides contact level measurement up to 69' or 21.1m of water column.
The general purpose two-wire pressure transmitter is offered in two configurations for different liquid types and provides contact level measurement up to 46' or 14m of water column.
The general purpose, DL10 ultrasonic sensor provides non-contact level measurement up to 49.2" (1.25m) with a 4-20 mA output.
The Flowline EchoSafe® level transmitter is explosion proof, two-wire ultrasonic transmitter and provides non-contact level measurement up to 10m in hazardous bulk storage, day tank and sump applications.
The Flowline EchoSonic II ultrasonic level transmitter which is a general-purpose two-wire ultrasonic transmitter provides non-contact level measurement up to 32.8’ (10 m).
The Flowline EchoSpanTM is a general-purpose two-wire ultrasonic transmitter that provides non-contact level measurement up to 32’or 10m.
CSA approved intrinsically safe for use in general purpose or hazardous applications, the two-wire ultrasonic transmitter provides non-contact level measurement up to 18' or 5.4m, and is ideally suited for challenging corrosive, slurry or waste liquids.
The general purpose two-wire, float transmitter provides contact level measurement up to 8' or 2.4m, and is ideally suited for relatively clean water, light weight oil or diluted corrosive liquids.
Plastic Pressure Transmitter
The DC4500 is a bleed and feed cooling tower controller with dual biocide timers.
The Seametrics AO55 is a blind (non-indicating) 4-20 mA transmitter, designed for use with almost all Seametrics flow sensors. It accepts a pulse frequency input from the flow sensor, and converts this input into a continuous analog output signal.
The FT430/440/450 flow computers are microcontroller-based indicator/transmitters that interface with pulse output flow sensors to compute and display flow rate, flow total, and also generate output signals representing flow.
The FT500-Series is a batching flow processor with additional output controls. It is designed for use with Seametrics flow meters and flow sensors, as well as other manufacturer’s products which have frequency output proportional to flow.
The Partlow MIC 1166 single loop high end controller may seem small, but it packs a punch with holding up to 4 programs of 16 free-format segments each and includes an event output.
The Partlow MIC 1460 is a 1/4 DIN microprocessor based, single loop process controller with programmable setpoint programs.
The Partlow MIC 1462 is a 1/4 DIN microprocessor based, single loop process controller with programmable setpoint programs. It can function as a basic process controller or execute any one of eight setpoint programs.
The Partlow MIC 6000 is a 1/4 DIN, microprocessor based, single loop, profiling, process controller. It can function either as a basic process controller or execute any one of eight setpoint profiles; each profile can have six ramp and six soak segments.
For low cost signal conditioning, the Sensorex TX100 loop powered transmitter offers a, 2-wire 4-20 mA pH transmitter.
The Mettler Toledo/Thornton M300 Dual Channel Meter series of process analytical instruments provide single-channel, multi-channel and multi-parameter models to measure conductivity, resistivity, pH/ORP, dissolved oxygen, ozone and flow rate.
The Mettler Toledo/Thornton M400 transmitter series offers full ISM functionalities with “Plug and Measure” feature and advanced diagnostics.
WebAlert® seamlessly web-enables your installed equipment, providing local and remote access to vital system information, without the need to physically visit remote sites.
The Signet 5075 Totalizing Flow Monitor features a traditional analog dial for flow rate at a glance while the backlit LCD provides precision flow rate, total volume and programming information.
The Signet 5500 Flow Monitor is an instrument that comes fully equipped with all of the basic tools needed for monitoring and controlling a flow system.
The Signet 5600 Batch Controller provides control capability and process fine-tuning in a familiar package.
The Signet 5700 pH/ORP Monitor is a versatile and intelligent instrument that recognizes the type of sensor connected, either pH or ORP, then automatically sets itself for the corresponding display and functionality.
The Signet 5800 ProPoint Conductivity Monitor features a unique analog/digital display, making it the preferred measurement instrument for applications requiring routine monitoring.
The Signet 8150 Battery Operated Flow Totalizer will provide years of dependable operation.
The Signet 8350 temperature sensor/transmitter offers local or remote display with current and relay outputs.
The Signet 8450 Pressure Transmitter is a unique instrument that offers local or remote display with current and relay outputs.
The Signet 8750 pH/ORP Transmitter is designed for broad application and ease of setup and use.
Signet 8550 Flow Transmitters are advanced instruments that convert signals from all Signet flow sensors into a 4 to 20 mA signal for long distance transmission.
The Signet 8850 Conductivity Transmitter is designed for multiple installation capabilities, simple set-up and easy operation, thus satisfying a broad range of application requirements.
The Signet 8900 Multi-Parameter Controller takes the concept of modularity to the extreme.
The AM-2250TX replaces the Shark TX.AquaMetrix has been making analyzers for over three decades. In 1990 the 2200 series debuted and have been highly regarded for their durability that most are still in use today. The Shark Controller and Shark TX transmitter were introduced as multi-parameter analyzers that switch between pH, ORP, conductivity and flow.
The Burkert sensor-fitting S030 has a built-in paddle wheel to measure the flow rate. When liquid flows through the pipe, the paddle wheel is set in rotation producing pulses whose frequency is proportional to the flow rate.
The Burkert fitting can be used to connect any Insertion device for a measurement in the pipe. e. g. for flow, pH, oxidation reduction potential (O.R.P) and conductivity measurement.
Forgot your password?
Thank you for contacting us!
Your message has been sent and someone will be contacting you shortly.
In the meantime, if you have any questions please feel free to call us at 800.370.0439.
The Maltz Sales Team